This Manipulator is for use on keypad locks where the key slot is either vertical or horizontal. Use the knurled nut that holds the key in such a position that the crossarm is vertical.
Physical Characteristics
Composition:
Aluminium, Stainless Steel
Size:
16.5 x 5.1 x 1.9 cm (6 1/2 x 2 x 3/4 in.)
INSTRUCTIONS
In addition to the above instructions: Tie a pull rope or string onto each of the holes (2) on the crossarm. Insert the key into the lock. Back away to a position that is parallel to the surface of the keyhole and pull the line that causes the key to rotate, in the correct direction.
When attaching an electric firing line to any Disrupter, verify that the opposite ends of the wires are shunted (twisted together) to ensure there is no electrical current in the firing line.
