Proparms Safety Ensured EOD Tools and Forced Entry Technology
Proparms Safety Ensured
Products Safety Timely Setup Demo Center Resources Worldwide Reach GSA Orders About Us Contact Us
  Home > Proparms Products > Disrupters > 29mm Neutrex
Homeland Security
  Bomb Squad
  Tactical Squad
  Hazmat Teams
29mm Neutrex
 

Following an extensive research and development program in association with the RCMP’s Canadian Bomb Data Center and the EOD Technicians of the Sûreté du Québec, Proparms’ engineering and manufacturing team introduced a Disrupter capable of disarming IED packages of approximately 16 kg (35 lbs.).  The operator requires no additional training on this Disrupter. Function and preparation for deployment is the same as for the 20mm Neutrex.  With a Recoil Reduced Venturi and Clamp in aluminium, the Unit may still be hand carried.  A Gas Cylinder recoil system has been incorporated into the mount so that the Disrupter may be mounted on a robot as well.


Unique Features

• Removable Safety Pin in Breech Block for safeguard against premature discharge. 
• The 29mm Neutrex may be used in either manual or robotic deployment.
• Ignition voltage at 24 volts renders the system compatible with remote vehicle power
   supplies.
• The Stand has a unique cable-locking cam to secure firing line. Setup and deployment is
   approx. 2 ½ minutes (similar to 20mm Neutrex).
• Incorporated Gas Cylinder recoil system reduces recoil by 30%.  Recoil Reduced Venturi
   further reduces recoil by 15% (water shots only).


Physical Characteristics
Height On Stand: 52.5 cm (21”)
Total length: 57.5 cm (22 ½”)
Weight: 16 kg (36 lbs.)
Width: On Stand 52.5 cm ( 21”)
Composition: Stainless Steel and Aluminium
Ignition voltage: P-Series Blasting Machine; 24 volts, 1 amp
Wire connection: Push Button
For Robot use: R.M.I. Bracket
Laser system: Dual Laser
Recoil system: Gas Cylinder recoil system, Recoil Reduced Venturi
 
Barrel
Composition: Stainless Steel
Length: 38 cm (15”)
Bore diameter: 29mm (1.14”)
Weight: 4.8 kg (10.6 lbs.)
 
Ammunition: (Not included as part of the system)
A - Electrically Primed (25 grain, 105 grain)
B - Steel Slug
C - Frangible Round (105 grain)

• The 29mm Neutrex Disrupter was designed to render safe I.E.D’s larger than
   9 kg (20 lbs.) considered to be the upper limit of the capability of the 20mm Neutrex.
• Designed to be used against nylon bags, suitcases and other large packages.
• The 29mm is too powerful to be used against open explosives such as uncased dynamite.
• Established standoff: 5 meters (15 ft.)

Available Accessories
 
Blasting Machine P1 & P2 models Wire Wheel
100m (330 ft.) and 50m (165 ft.) 
RMI Bracket (Pedsco & Universal models)
 

Disrupters
12.5mm Neutrex
12.5mm Recoilless
20mm Neutrex
20mm Recoilless
29mm Neutrex

Universal Collapsible Stand

Blasting Machine P1 & P2
Recoil Absorbing Mechanism (RAM)
EOD Tools
Safety Tips

Safety Tip 1

In the interest of safety, never stand in front of or behind a loaded Disrupter.

  More

Safety Tip 2

When attaching an electric firing line to any Disrupter, verify that the opposite ends of the wires are shunted (twisted together) to ensure there is no electrical current in the firing line.

  More
 
Home | Products | Safety | Timely Setup | Demo Center | Resources | Worldwide Reach | GSA Orders | About Us | Contact Us | Privacy Statement
All rights reserved. All images are © copyright of Proparms Ltd. 2006
Design by Southern Design