The 20mm Neutrex was the original Disrupter that led to Proparms becoming a world leader in disrupter technology. It is still considered by many to be the best "all purpose Disrupter" available on the market. It is highly versatile and can be used in a variety of situations, including underwater. The 20mm Neutrex may be used in either manual or robot deployment. With current requirements of 12 volts per 1 amp, it is compatible with robot power supplies. No tools are required for setup and preparation. The Unit is made of a hollow construction to reduce blast barriers. The Stand has a unique cable-locking cam to secure the firing line. Setup and deployment is approximately 2 ½ minutes.
Unique Features
Removable Safety Pin in Breech Block for safeguard against premature discharge. Anti-slip ring is incorporated into Barrel to prevent Barrel from sliding in Clamp. Recoil Reduced Venturi reduces recoil by approx. 15% (water shots only). Ram-Recoil Absorbing Mechanism, for robot mounting, reduces recoil by 40%. Barrel Clamp with locking nut. Optical Sight for precision aiming 3 metre (10 ft.) standoff (optional accessory). Disrupting capability-effective range up to 3 metre (10 ft.).
The 20mm Neutrex is designed to disrupt a device no greater than 30 x 30 x 30cm (12x 12x 12 approx.).
The 20mm with a 70 grain Cartridge should be used when facing exposed, high explosives, such as Dynamite 75% Forcite.
The 20mm with a 75 grain Cartridge can be used on plywood boxes up to 19mm (0.7).
The 20mm with a 80 grain Cartridge can be used on a wood box up to 19mm (0.7).
The 20mm with a 85 grain Cartridge and Optical Sight can be fired with up to a 3 meter (10 ft.) standoff and against hard targets such as ammo boxes, metal cases, etc.
When attaching an electric firing line to any Disrupter, verify that the opposite ends of the wires are shunted (twisted together) to ensure there is no electrical current in the firing line.
